Power Washing in Des Moines
Driveways, patios, walkways — restored.
JBL Exterior Pros provides power washing across Des Moines and 30 miles of central Iowa — driveways, sidewalks, patios, and pool decks. We adjust pressure to each surface, pre-treat oil stains, and document the work. Insured, in-person quoted, no online estimates.
- Driveway turnaround
- 1–3 hours, 2-car
- Pressure range
- 1,500–3,000 PSI by surface
- Sealer dry time
- 24–48 hours (optional add-on)
Power Washing, in detail.
High-pressure cleaning for hard surfaces — concrete, brick pavers, stamped patios. Built-up dirt, tire marks, organic staining and grime lifted out for a like-new finish.
- Driveways, sidewalks, walkways
- Patios — stamped, paver, or concrete
- Pool decks and stamped surrounds
- Garage floor pre-clean
- Surface sealer available (separate quote)
Three steps, no surprises.
- 01
Surface evaluation
We identify the surface type and degree of staining. Some patios need a surface cleaner attachment for even results — we confirm the right approach.
- 02
Pre-treat stains and wash
Oil spots and organic staining get pre-treated. Then a uniform pressure wash across the surface — no striping, no missed sections.
- 03
Rinse and detail
Final rinse, sweep cleanup, and a walk-through. Optional sealer can be applied after the surface dries (24-48 hours).
Power Washing, on the job.
Frequently asked power washing questions
01Will pressure washing damage my concrete or pavers?
Not when done right. We calibrate pressure to the surface — pavers get lower pressure to avoid lifting joint sand, concrete can handle more. We adjust the rig setup before starting based on what we see during the walk-through, so the pressure doesn't exceed what the surface can take.02Do you re-sand paver joints after?
Yes when needed. We can re-sand with polymeric joint sand as a separate add-on. We'll recommend it during the walk-through if your pavers need it.03What about oil stains?
We pre-treat them. Old, set-in oil rarely lifts 100%, but most stains improve significantly. We'll set expectations during the quote.04How much does power washing a driveway cost in Des Moines?
Pricing depends on driveway size, surface type (concrete, paver, stamped), and the condition of the staining. Heavy oil and tannin pre-treatment add to the price. We quote in person after seeing the surface — no surprise pricing.05Can I power-wash my wood deck?
We strongly recommend soft washing for wood decks — high pressure raises grain, splinters, and strips stain. Pressure cleaning is fine for the concrete patio next to the deck, but the wood itself should be soft-washed with deck-safe chemistry.06Concrete vs. pavers — different approach?
Yes. Sealed concrete can take 2500–3000 PSI through a surface cleaner. Pavers need lower pressure (1500–2000 PSI) plus careful overlap to avoid lifting joint sand. Stamped concrete sits in between. We adjust the rig setup at the property before starting.07Will it remove paint?
Only if you want it to. Power washing can intentionally remove failing paint as prep for repainting — we set the pressure for that purpose if it's the goal. Otherwise we calibrate pressure to clean without disturbing intact finishes.08When can I drive on it again?
Right away on cleaned concrete and pavers. If we apply a sealer, it needs 24 hours dry time for foot traffic and 48 hours for vehicles. We'll cone the area and confirm the schedule on the day of service.
Ready for power washing?
A JBL rep walks your property in person within one business day. Honest pricing, real recommendations, no obligation.